Blade Material: T10 Steel Clay Tempered Real Hamon. Hamon Type / Blade Struture& Length / Sori / Fittings / Evgrave / Kissaki Type. Real katana sword: This katana is a handmadeT10 Steel sword for 100%.
Read More
Product Parameter: Number: 9050 Material: T10 high carbon steel Overall: 103cm / 40.6″ Blade: 70cm / 27.5” Handle: 26 cm / 10.24” Widdth: 3.2 cm / 1.26” Thickness: 0.7cm / 0.28” HRC(hardness): 56 BO-HI: with blood groove, can be removed for free. Hamon: Yes, can be removed for free. Nakago: Full tang Package: 1sword+1random bag Craft: Fully Hand-forged,water quench treatment,carefully Hand-polished, etc.* The steel we use is not the normal steel with the truck or cars or other life electrics, the steel use for the blade contents much more carbon and the purity can not be comparable . * It’s a functinonal sword. After test, it can cut bamboo, A4 paper and water bottles,etc . Additional ServiceAbout usSword Noun ExplananationDelivery detailsSword maintenanceAdditional ServiceIt’s free for engraving English words, Chinese Characters and Japanese Kanji , etc. You need pay extral $20-30 for engraving patterns. SharpnessMost of our blades are sharp. We can also make the blade unsharpened for free if you require. Matching Swords SetIf you buy one katana, we can make a matching Wakizashi or Tanto for you. The price varies from different swords. Please contact us if you need make custom matching set. About us We have our own sword-casting factory. The factory is located in Longquan, a small town with a long history of sword-casting in China. Most of the famous Swords in China are made there. Rich raw materials, skilled technology, traditional sword casting technology from generation to generation. Manual production really takes a lot of time. We will prepare most products in advance ，and arrange delivery within about a week. However, sometimes the delivery time is delayed due to weather or raw materials，etc. we hope to get your understanding. Feel free to contact us to inquire about the status of your order. Each handmade sword is unique. Our swords are great for gifts or for your own collection. Our swordsmithing master makes every sword attentively, hope you can feel our sincerity. We will also give you the best customer service, any questions please feel free to contact us. Sword Noun ExplananationQuenching After the blade has been shaped, the sword would be quenched. We quench our swords in either water or oil. Water quenching produces a tougher edge which can also be hardened further more using clay. Blades quenched in oil are still considerably hardened and do have superior flexibility compared to a water quenched blade. Folded Steel : In the forging process , the most useful process is the folding, where the metals are forge welded, folded, and welded again, as many as 124 times(15 times is the best). The folding removes impurities and helps even out the carbon content, while the alternating layers combine hardness with ductility to greatly enhance the toughness. The less impurities, the harder and sharper the blade will be. We have done cutting tests on the blades. it can cut bamboo(young bamboo tree), grass mattings and slice paper(The blade should be tilted at 45 degrees). Clay tempered : To maximize both the cutting edge and the resilience of the sword spine, a technique of differential heat-treatment is used.The sword is painted with layers of clay before heating, providing a thin layer or none at all on the edge of the sword, ensuring quick cooling to maximize the hardening for the edge.A thicker layer of clay is applied to the rest of the blade,causing slower cooling.This creates softer,more resilient steel, allowing the blade to absorb shock without breaking. About 1095 carbon steel : The best quality of high carbon steel is at 1095, the carbon content was 1.03%, and the element contains a small amount of chromium, molybdenum, vanadium, after heat treatment can reach HRc58-60 hardness, toughness is very good, but not resistant to rust, more be applied to traditional european-style hunting knife, large cutting knife and military dao. Such as the United States during world war ii “KA – BAR” saber is in 1095 as the blade material. Kobuse : The vast majority of modern katana and wakizashi are the maru type which is the most basic, with the entire sword being composed of a single steel. The kobuse type is made using two steels, which are called hagane (edge steel) and shingane (core steel). Steel of different materials is forged and welded together to hammer the basic shape of the sword. This allows the overall blade to have a higher toughness and absorb a lot of impact. Reducing the possibility of breaking or bending to some extent. Makes the blade not only has high hardness, but also has super toughness Delivery details a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. b) If you do not receive the package, or the package is damaged during transportation. We’ll take care of it. Please feel free to buy. c) If it is mentioned in the product description that the package includes the sword bag or sword holder , the style will be random. The sword holder or sword bag on the ebay picture is the props we use for shooting. If you really like a style, please contact us before buying. d) If you have any problem after recieve the package (wrong size, wrong style, etc.). We always provide you with the best after-sales service. Please give us a chance to help you before you give us a bad feedback. Thank you very much!Sword maintenance
eBay Items Description Condition: Brand-New Blade Material: 1095 Carbon Steel Overall Length: 40.5 Inch /104Cm Nagasa Length: 27.8inch/70.5cm Handle Length: 10.6 Inch / 27 Cm Blade Shape: Shinogi Zukuri Blade Edge: Hand Polished Be Razor Sharp Handle Material: Ray Skin + Hard Wooden Blade Width (Near Kissaki): 0.91inch / 2.3cm Width (Near Habaki): 1.26 Inch / 3.2Cm tsuba Material: High Quality Japanese Iron Saya Material: High Quality Wood Saya Tsuka Ito: Chu-kissakireal ray skin covering and real navy silk wrap Bohi:Yes If you need Sword Stand, please click on the image Mekugi:Nr. in bamboo Structure:Maru PACKAGE: 1 x Sword 1 x Sword Bag Tsuba is made of Iron material with elegant patterns. Other accessories are also made of Brass material, so there is no need to worry about fading and discoloration.The sheath is made of wood and Repeatedly polished and lacquered, with beautiful and delicate patterns.The handle(Tsuka) is made of wood, covered with real ray skin inside, wrapped with cotton rope. Sageo is a thick cotton rope, which feels better and looks more beautiful Real katana sword: This katana is a handmade 1095 Carbon Steel sword for 100%. after more than 10 traditional processes, including annealing, tempering, quenching, and other heat treatment processes, is super sharp and durable. The sheath is made from high-quality wood and oil paint.The blades are hand polished , the blades are very sharp and can be used for real cutting swords. Samurai sword:The samurai sword is very suitable as a collectible, and it is also very suitable as a gift for like-minded friends. But please note that this is a real Katana sword, so please don’t point it at people or animals. It is the perfect choice for you as a gift to relatives and friends or for outdoor activities. What you need to do is cleaning it with cloth or tissue.in Daily use, you also should pay attention to maintenance the product.Try not to touch the water. Once it touches the water, you must clean up the water. Avoid remaining moisture on the blade.Be careful do not place in a place where it is wet and in direct sunlight. And its handle is fixed by two “bamboo nails”, which greatly enhances the stability of the sword.The rope of the handle is made of pure cotton and wrapped manually. It is very tight, sweat-absorbing and skid-resistant, so as not to slip out of your hand. The blade is forged and polished repeatedly using traditional and unique technology. The surface is very smooth. We Can Customize Your Unique Sword Hamon Type / Blade Struture& Length / Sori / Fittings / Evgrave / Kissaki Type Or You Want Replace This Sword Fitting KATOKU – Sword Forge Copyright
Handmade Damascus Hunting Knife. Blade Material Damascus Steel. ✔ Forged Performance: Hand-forged Damascus steel featuring a layered raindrop pattern for excellent strength, edge retention, and a unique flowing texture.
eBay Items Description Condition: Brand-New Blade Material: T10 Steel Clay Tempered Real Hamon Overall Length: 40.5 Inch /104Cm Nagasa Length: 27.8inch/70.5cm Handle Length: 10.6 Inch / 27 Cm Blade Shape: Shinogi Zukuri Blade Edge: Hand Polished Be Razor Sharp Handle Material: Genuine Ray Skin + Hard Wooden Blade Width (Near Kissaki): 0.91inch / 2.3cm Width (Near Habaki): 1.26 Inch / 3.2Cm tsuba Material: High Quality Japanese Iron Saya Material: High Quality Wood Saya Tsuka Ito: Chu-kissakireal ray skin covering and real navy silk wrap Bohi:Yes If you need Sword Stand, please click on the image Mekugi:Nr. in bamboo Structure:Maru PACKAGE: 1 x Sword 1 x Sword Bag Tsuba is made of Iron material with elegant patterns. Other accessories are also made of Brass material, so there is no need to worry about fading and discoloration.The sheath is made of wood and Repeatedly polished and lacquered, with beautiful and delicate patterns.The handle(Tsuka) is made of wood, covered with real ray skin inside, wrapped with cotton rope. Sageo is a thick cotton rope, which feels better and looks more beautiful Real katana sword: This katana is a handmade T10 Steel sword for 100%. after more than 10 traditional processes, including annealing, tempering, quenching, and other heat treatment processes, is super sharp and durable. The sheath is made from high-quality wood and oil paint.The blades are hand polished , the blades are very sharp and can be used for real cutting swords. Samurai sword:The samurai sword is very suitable as a collectible, and it is also very suitable as a gift for like-minded friends. But please note that this is a real Katana sword, so please don’t point it at people or animals. It is the perfect choice for you as a gift to relatives and friends or for outdoor activities. What you need to do is cleaning it with cloth or tissue.in Daily use, you also should pay attention to maintenance the product.Try not to touch the water. Once it touches the water, you must clean up the water. Avoid remaining moisture on the blade.Be careful do not place in a place where it is wet and in direct sunlight. And its handle is fixed by two “bamboo nails”, which greatly enhances the stability of the sword.The rope of the handle is made of pure cotton and wrapped manually. It is very tight, sweat-absorbing and skid-resistant, so as not to slip out of your hand. The blade is forged and polished repeatedly using traditional and unique technology. The surface is very smooth. We Can Customize Your Unique Sword Hamon Type / Blade Struture& Length / Sori / Fittings / Evgrave / Kissaki Type Or You Want Replace This Sword Fitting KATOKU – Sword Forge Copyright
This 29” Ninja Sword by Tattva Tactical is perfect for any Samurai enthusiast. The blade is made of 8cr13 stainless steel and is razor sharp, ensuring a quick and clean cut every time. The full tang design and cord wrapped handle make it easy to handle, while the black color and Japanese style add a touch of elegance. This single-handed sword is perfect for right-handed individuals and has a single edge. It is an original piece, made in China with authentic Japanese style. Whether you’re a collector or a fan of ninja swords, this Tanto Steel Hilt Full Tang Razor Sharp Samurai Battle Ready sword is a must-have. Includes high quality nylon sheath with back strap Item ships express from USA
eBay Document We Can Customize Your Unique Sword Blade Struture/ Length / Sori / Hamon Type / Kissaki Type / Engraving / Fittings ABOUT THE SWORD: Fully functional and battle ready.The accessories of the sword are all authentic.It is designed by our experienced swordsmith with carefully crafting to creat a high-performance blade for real use.The sword is really cost-effective and will be your best choice to show to your friends or keep it as a collection or send it as the gift.Also,it is very suitable for training and cutting pratice. Description: Overall Length: 40.6 inch/103 cm Blade Material: T10 Steel Clay Tempered Blade Length: 28 inch/71cm Saya Material: Hard Wooden and Lacquer Work Finished Handle Length: 10.6 inch/27 cm Handle Material: Genuine Ray skin + Hard wooden Structure: Maru Tsuba Material: High quality Brass Tsuba Blade Width(near Kissaki): 0.91 inch 2.3 cm Hardness(HRC): 58 Blade Width(near Habali): 1.29 inch 3.15 cm Bohi: No Blade Edge Hand Polished Be Razor Sharp Kissaki Shape: CHU -kissaki Blade Shape: Shinogi- Zukuri Condition: Brand New 1. Fittings: Koshirae have The Tsuba, Fuchi and Kashia(Buttcap)of the sword made of High Quality Brass,The brass Habaki(Blade collar)is a one piece Construction. Two Brass seppas( Spacer) secure the Tsuba. Tsuka: the tsuka(Handle) core is wooden and it’s tightly Wrapped over Ray Skin(Samegawa)with black ito Wrapped. 2. Real katana sword: The blade was Made of T10 Steel .Real Hamon Differential Hardened and Clay Tempered. the entire blade presents a Hamon similar to tiger stripes, which is special and has a high artistic arrerciation value. It broke the boundaries of hamon pattern,and large areas of flying burn appeared on the pickaxe Ground. NOTICE: A free&random sword bag comes with the sword The display stand in the sword pictures is NOT included，If you need stand ,please click on the image on the right! Due to All of our products are full handmade,So it varies a little from sword to sword. SWORD PICTURES CUSTOMIZATION SERVICES: ( Customized Sword Send From China) (You can choose the following sword fittings to replace the original ones!) Reference Diagram: The sword is composed of a large array of fittings , tsuba, Ito&Sageo and Saya and ray skin,all of our swords are available to be customized. BO-HI (blood groove), blade without HI is stronger for cutting, blade with HI is lighter for practice. All blades are regular sharp,please contact us when you need a blunt or a razor sharp blade.(It cost extra 10usd for razor sharpening and takes more time to finish) A Wakizashi and a Tanto can be customized to match this katana. High Quality Japanese Brass Tsuba Set: You Can choose the Following Copper Koshirae Set to replace This Sword’s Original ones Add $45 for the choosing You Can also bring pictures for consultation Genuine Rayskin: You Can choose the Following Genuie Rayskin to replace This Sword’s Original Genuie Rayskin Free for choosing Tsuka-ito&Sageo: You Can choose the Following ito to replace This Sword’s Original ito Free for choosing We also have Cow Leather Tsuka-ito ,if you need it , you can consult us! Tsuka-Maki: You Can choose the Following Tsuka-Maki to replace This Sword’s Original Tsuka-Maki Free for choosing ENGRAVING SERVICES Laser engraving cost $10,Etch engraving cost $20. Engravings on the blade toward the handle,adjacent to tsuba. Some other locations are also avaliable for engraving. Saya hand engravings cost $20. It takes 1-2 days more for laser engraving while 3-4 days more for etch engraving and Saya hand engravings.
Real katana sword: This katana is a handmadeT10 Steel sword for 100%. The sheath is made from high-quality wood and oil paint.The blades are hand polished, the blades are very sharp and can be used for real cutting swords.
Custom Handmade High-Quality Stainless steel Collectible Alloy Rosewood knifeif you’re looking for a fixed blade knife that will be a reliable companion, look no further! This knife epitomizes the bold. The main qualities that make it great: sturdiness, sharpness, and looks. The ergonomic design is easy to hold and carry with the included leather sheath. Great for survivalists, tactical personnel, outdoors-men or anyone who appreciates fine craftsmanship and an amazing blade. The blade is Stainless steel, double-edged, and razor sharp. It’s sturdy enough to last through even the harshest conditions. The handle is beautifully polished, with alloy Rosewood pakka wood grips. Designed to feel comfortable and natural in the hand. Even in different conditions, you’ll feel confident that the knife will stay firmly within your grasp. FEATURES & SPECIFICATIONSTotal Length: 9″Blade length: 4.5″ Handle Length : 5″ Blade Material: Stainless Steel Blade Hardness: 50-58HRC on Rockwell scale Handle Material: Rose Bone WoodSheath: Genuine Leather Care Instructions: Keep the blade dry after each cleaning. Warning: Take care when removing product from packaging. Keep fingers clear of blades. Store away from children.Complimentary gift messages*Gift wrapping service available for minimal additional fee ADD ONS:*Custom orders for 10 or more pieces. You can choose & submit your own handle or design. LIFETIME WARRANTY No premium knife is complete without a lifetime warranty; our masterpiece knife is fully covered for life,
eBay Items Description Condition: Brand-New Blade Material: 1095 Carbon Steel Overall Length: 19.6 Inch /78Cm Nagasa Length: 27.8inch/50cm Handle Length: 8.1 Inch / 21 Cm Blade Shape: Shinogi Zukuri Blade Edge: Hand Polished Be Razor Sharp Handle Material: Ray Skin + Hard Wooden Blade Width (Near Kissaki): 0.91inch / 2.3cm Width (Near Habaki): 1.26 Inch / 3.2Cm tsuba Material: High Quality Japanese Iron Saya Material: High Quality Wood Saya Tsuka Ito: Chu-kissakireal ray skin covering and real navy silk wrap Bohi:Yes If you need Sword Stand, please click on the image Mekugi:Nr. in bamboo Structure:Maru PACKAGE: 1 x Sword 1 x Sword Bag Tsuba is made of Iron material with elegant patterns. Other accessories are also made of Brass material, so there is no need to worry about fading and discoloration.The sheath is made of wood and Repeatedly polished and lacquered, with beautiful and delicate patterns.The handle(Tsuka) is made of wood, covered with real ray skin inside, wrapped with cotton rope. Sageo is a thick cotton rope, which feels better and looks more beautiful Real katana sword: This katana is a handmade 1095 Carbon Steel sword for 100%. after more than 10 traditional processes, including annealing, tempering, quenching, and other heat treatment processes, is super sharp and durable. The sheath is made from high-quality wood and oil paint.The blades are hand polished , the blades are very sharp and can be used for real cutting swords. Samurai sword:The samurai sword is very suitable as a collectible, and it is also very suitable as a gift for like-minded friends. But please note that this is a real Katana sword, so please don’t point it at people or animals. It is the perfect choice for you as a gift to relatives and friends or for outdoor activities. What you need to do is cleaning it with cloth or tissue.in Daily use, you also should pay attention to maintenance the product.Try not to touch the water. Once it touches the water, you must clean up the water. Avoid remaining moisture on the blade.Be careful do not place in a place where it is wet and in direct sunlight. And its handle is fixed by two “bamboo nails”, which greatly enhances the stability of the sword.The rope of the handle is made of pure cotton and wrapped manually. It is very tight, sweat-absorbing and skid-resistant, so as not to slip out of your hand. The blade is forged and polished repeatedly using traditional and unique technology. The surface is very smooth. We Can Customize Your Unique Sword Hamon Type / Blade Struture& Length / Sori / Fittings / Evgrave / Kissaki Type Or You Want Replace This Sword Fitting KATOKU – Sword Forge Copyright
